Komatsu PW118MR-11 Operation & Maintenance Manual page 131

OPERATION
REMARK
When the engine is started, the selected speed remains the
same as the one set before the machine stopped.
During loading and unloading operations from a trailer always
use the speed "CR".
Before switching the travel speed from "HI" to "LO" and vice-
versa, the machine must be at a standstill and with the service
brake pressed.
The passage from "LO" to "CR" can be carried out at any time.
If the service brake is not pressed correctly, the warning indica-
tor shown in the figure is displayed on the monitor.
REMARK
Each time the travel speed reduction switch is pressed, the
mode will be displayed enlarged on the monitor display and, af-
ter two seconds, it will return to the standard screen.
WENAM00130
EXPLANATION OF COMPONENTS
RKA61310
RKA52160
RKA61290
RKA61300
3-59