Komatsu PW118MR-11 Operation & Maintenance Manual page 148

EXPLANATION OF COMPONENTS
1.
Select "ECO Gauge display" (8) from "Configurations"
screen, then press switch F6.
2.
"ECO Gauge Display" setting screen appears.
• "ON": Displays the ECO gauge (7) on the standard
screen.
• "OFF": Does not display ECO gauge (7) on the stand-
ard screen.
On this screen, it is possible to perform the following oper-
ations with switches F3 to F6.
F3: Moves to the next item (1 line below). When on the last
line, it moves to the first line.
F4: Moves to the previous item (1 line above). When on
the first line, it moves to the last line.
F5: Cancels the setting and returns the screen to "Configurations" screen.
F6: Changes the setting and returns the screen to "Configurations" screen.
SET TARGET FUEL CONSUMPTION VALUE DISPLAYED IN ECO GAUGE
It is possible to change the target fuel consumption value (the upper limit value of the green range) of the ECO
gauge (7).
1.
Select the target fuel consumption value displayed in
"ECO Gauge Display Fuel Target Value" (9) from "Configu-
rations" screen, then press switch F6.
2.
"ECO Gauge Display Fuel Target Value" appears.
On this screen, it is possible to perform the following oper-
ations with switches F3 to F6.
F3: Decreases the target fuel consumption value by 1 ℓ/h.
F4: Increases the target fuel consumption value by 1 ℓ/h.
F5: Cancels the setting and returns the screen to "Configu-
rations" screen.
F6: Changes the setting and returns the screen to "Config-
urations" screen.
3-76
WENAM00130
OPERATION