Komatsu PW118MR-11 Operation & Maintenance Manual page 137

OPERATION
• Press the operating mode switch.
For details concerning the operating mode switch, see
"WORKING MODE SELECTOR SWITCH (3-54)".
When the operating mode is modified, the corresponding
lamp is highlighted in yellow for 2 seconds; it then returns
to blue after this time has elapsed.
• Press the speed increase switch.
For details concerning the speed increase switch, see
"SWITCH FOR INCREASING TRAVEL SPEED (3-56)".
When the travel speed is increased, the lamp in the upper
part of the monitor is highlighted in yellow for 2 seconds
and then returns to blue.
• Press the speed decrease switch.
For details concerning the speed decrease switch, see
"TRAVEL SPEED REDUCTION SWITCH (3-58)".
When the travel speed is reduced, the lamp in the upper
part of the monitor is highlighted in yellow for 2 seconds
and then returns to blue.
• Press the auto-deceleration switch to turn the auto-decel-
eration function ON/OFF.
Even if the auto-deceleration switch is pressed, the cam-
era image display screen does not switch to another
screen or return to the standard screen display.
For details concerning the auto-deceleration switch, see
"AUTO-DECELERATION SWITCH (3-56)".
• Press the buzzer deactivation switch to stop the alarm
buzzer for the abnormality of warning item.
For details concerning the buzzer deactivation switch, see
"BUZZER CANCEL SWITCH (3-61)".
Even if the buzzer deactivation switch is pressed, the cam-
era image display screen neither switches to another
screen nor returns to the standard screen.
WENAM00130
EXPLANATION OF COMPONENTS
RKA48190
RKA48191
RKA48191
RKA48193
RKA48194
3-65