Komatsu PW118MR-11 Operation & Maintenance Manual page 319

OPERATION
METHOD FOR REMOVING THE BATTERIES
1.
Open the rear left cover (1)
2.
Position the lever (2) in the lock position of the cover.
3.
Remove the wing nuts (3) (4 places).
4.
Remove the rubber cover (4).
5.
Remove the screws (5) and the support (6).
6.
Remove the cable (7) on the negative (-) terminal side
(ground side) first.
7.
Remove the cable (8) on the positive (+) terminal side and
the connecting cable (9).
8.
Remove the 4 nuts (10) and the brackets (11).
9.
Remove the 3 stud-bolts (12).
10. Extract the battery (13).
11. Move the battery (14) parallel to the radiator and extract it.
BATTERIES INSTALLATION METHOD
NOTICE
After securing the batteries, check that they do not move.
1.
Position the battery (14).
2.
Position the battery (13).
3.
Fit the stud-bolts (12).
4.
Fit the brackets (11) and fix them with the 4 nuts (10).
5.
Connect the cable (8) to the positive terminal (+).
6.
Connect connecting cable (9) to the positive (+) terminal.
7.
Connect cable (7) on the negative (-) terminal side (ground
side).
WENAM00130
TROUBLES AND ACTIONS
RKA64990
RKA65020
RKA65000
RKA65000
3-247