Table of Contents
Advertisement
HANDLE MACHINE READY FOR INSTALLATION OF ATTACHMENT
3.
Set the lock lever to FREE position (F).
4.
Operate each control lever (work equipment, travel) and
attachment control switch fully in each direction within 15
seconds after the engine is stopped to release the internal
pressure in the hydraulic circuit.
5.
Set the lock lever securely in LOCK position (L).
6.
Turn the ignition key to the OFF position (A).
6-12
WENAM00130
ATTACHMENTS AND OPTIONS
RKA52830
RKA48500
Advertisement
Chapters
Table of Contents
