Table of Contents
Advertisement
EXPLANATION OF COMPONENTS
•
On the standard screen EE, when the F3 key is pressed, the display screen QQ is displayed. The Komvi-
sion image is enlarged. Pressing the F3 button again displays the screen NN and the camera is displayed
on the entire screen.
•
When the F5 key is pressed again, the display returns the previous one.
REMARK
The button on the right joystick can also be used to quickly enable the camera full-screen mode and vice-versa.
Operations to change the display when the travelling on street mode is active
The following is the method of changing the camera image display on the monitor.
When the forward gear (F) is engaged or the machine is in neutral (N)
•
The display screen PP is shown.
•
Pressing the F3 key displays the full-screen OO display screen.
•
Pressing the F3 key or the F5 key again, the image returns to the PP screen from the OO full screen image.
•
When the reverse gear (R) is engaged
•
The OO full-screen display is shown and the display cannot be changed on the monitor.
Other mode operations while camera image is displayed
Even when the camera image is displayed, it is possible to operate the following modes.
•
The air conditioner can be operated.
When the air conditioner switch is operated, the screen
switches to "A/C Setting" screen. When the screen
switches to "A/C Setting" screen, press switch F6 to return
to the camera image display screen. In addition, if no oper-
ation is performed for 5 seconds after the screen switches
to "A/C Setting" screen, the screen automatically returns to
the camera image display screen.
For details of the air conditioner operation, see "HANDLE
AIR CONDITIONER (3-218)".
3-64
WENAM00130
OPERATION
RKA61390
Advertisement
Chapters
Table of Contents
