Komatsu PW118MR-11 Operation & Maintenance Manual page 239

OPERATION
To adjust the height of the steering wheel.
2.
Unscrew the steering wheel's lock nut anti-clockwise (2). After adjusting, tighten the steering wheel's lock
nut clockwise (2).
CAMERA VISIBILITY CONTROL METHOD
Camera visibility control Visibility cannot be ensured if the cameras are not adjusted properly with con-
sequent risks of serious injury to oneself or to other people.
Visibility control of the rear camera
Check that individuals within 1 m from the rear of the machine
(W) are displayed on the monitor.
Visibility control of the side cameras
Place a traffic cone at a height of about 70 cm (C) at the rear of the machine where distance (A) is approximate-
ly 1 m behind the center line of the wheel and distance (B) is about 1 m outside it.
If the traffic cone can be seen on the monitor screen, visibility is
correct.
MACHINE OPERATIONS AND CONTROLS
k k
WARNING
WENAM00130
RKA63880
RKA67580
3-167