Komatsu PW118MR-11 Operation & Maintenance Manual page 134

EXPLANATION OF COMPONENTS
BLADE/OUTRIGGERS SELECTOR SWITCH
On machines with blade/outriggers, press the F2 key to access
the outriggers selection screen.
REMARK
The blade and outriggers are controlled by the right joystick.
For details, see "BLADE/OUTRIGGERS CONTROL SWITCH
(3-103)" and "WORK EQUIPMENT CONTROL LEVERS
(3-116)"
The selection of the front and rear attachments can be made
directly with the F/B/R switch on the left joystick. For details of
the caution lamps, see "F/N/R SWITCH (3-104)".
On machines with no blade and outriggers, no icon is displayed
above the F2 key.
On machines fitted with the front blade or the rear blade only,
the attachment does not need to be selected, since the control
is performed directly with the blade control switch on the right
joystick.
If no key is activated for more than 5 seconds, the monitor re-
turns to the Home screen maintaining the settings.
• When the lamp has a grey background: the attachment is not selected.
• When the lamp has a blue background: the attachment is selected.
• When the lamp has a green background: the attachment is operating.
• When the lamp has a yellow background: the attachment is activated with the F/B/R switch on the left joy-
stick. For details, see F/N/R SWITCH (3-104)
On the outriggers/blade mode screen the operations can be performed with keys from F1 to F6.
Machine with front and rear outriggers
Press the F1 key to select the use of the left front outrigger.
Press the F2 key to select the use of the right front outrigger.
Press the F3 key to select the use of the left rear outrigger.
Press the F4 key to select the rear right outrigger.
Press the F5 key to select the simultaneous use of all the out-
riggers.
Press the F6 key to return to the home screen.
To clear, press the key corresponding to the attachment (keys
F1 to F4).
Machine with front blade and rear outriggers
Press the F1 key to select the use of the front blade.
Press the F3 key to select the use of the left rear outrigger.
Press the F4 key to select the rear right outrigger.
Press the F5 key to select the simultaneous use of the blade
and outriggers.
Press the F6 key to return to the home screen.
To clear, press the key corresponding to the attachment (keys
F1, F3, F4).
3-62
WENAM00130
OPERATION
RKA61360
RKA52170
RKA52180