Komatsu PW118MR-11 Operation & Maintenance Manual page 264

MACHINE OPERATIONS AND CONTROLS
4.
Position the swing support and the chassis by aligning the
collimation marks as shown in the figure.
5.
Position the arm by aligning the decal with the reference
as shown in the figure.
6.
Lift the blade or outriggers. If the machine is equipped with
outriggers, fasten them with safety cables.
7.
Secure a metal cable to the pins of the bucket as shown in
the figure
8.
Insert the boom rotation pedal stop (2).
9.
Check that the outriggers or blade are raised and that the
attachment is raised from the ground by at least 40-50 cm.
10. Check that the work brake is disengaged. For details, see
"BRAKE PEDAL (3-114)"
11. Check that the control levers are in the neutral position.
12. Check that the axle lock is deactivated. For details of the
caution lamps, see "AXLE LOCK SWITCH (3-102)".
13. Check the alignment of the turret and align it if necessary.
For details of the caution lamps, see "TURRET ALIGN-
MENT WARNING LIGHT (3-50)".
3-192
WENAM00130
OPERATION
RKA63890
RKA54110