Komatsu PW118MR-11 Operation & Maintenance Manual page 132

EXPLANATION OF COMPONENTS OPERATION
STREET MODE SWITCH
The street mode switch activates/deactivated the travel on
street mode.
When this function is activated, the monitor automatically
switches to gauges only indicator, the levers commands are
blocked, and the street mode is displayed enlarged on the
monitor display for two seconds.
REMARK
When the engine is started, the function remains the same as
that set when the engine was stopped.
RKA61320
The following conditions must be met to activate street mode
correctly.
The steering mode must be 2WS (a).
The upper chassis must be aligned with the lower chassis (b).
The rear wheels must be aligned (c).
If these conditions are not met, the corresponding correction in-
dicator lights will be displayed on the monitor and another
street mode lamp will be displayed in red.
If all conditions for activation are met, the street mode lamp is
RKA61330
displayed in blue and the street mode is active.
REMARK
The "HI" speed should be set when driving on flat public roads.
The maximum travel speed can also be adjusted with the hand throttle. For details, see "FUEL CONTROL DIAL
(3-100)"
3-60
WENAM00130