TRANSPORTATION
1.
Engage the brake of the trailer, then place the blocks (1)
under the tyres to prevent the trailer moving.
2.
Set the right and left ramps (2) parallel to each other and
equally spaced to the right and left of center (3) of the trail-
er. Make angle of installation (4) a maximum of 15 deg.
If the ramps bend a large amount under the weight of the
machine, put blocks under the ramps to prevent them from
bending.
3.
Remove the machine fastening chains and metal cables.
4.
Start the engine and in the event of low temperature, per-
form the warm-up operation.
5.
Set the lock lever to the FREE position (F).
6.
Set the speed to slow CR) with the function key (5). The
selected travel speed is displayed by the caution lamp (6).
7.
Deactivate the auto-deceleration function with the function key (7) and operate the hand throttle to set the
engine at low speed.
3-236
WENAM00130
OPERATION
RKA61281