Komatsu PW118MR-11 Operation & Maintenance Manual page 166

EXPLANATION OF COMPONENTS
• When you press switch F6 after inputting the ID which
is not registered to the "Operator ID Change" screen,
a message is displayed below and the screen returns
to the "Monitor Setting" menu screen.
In this case, the identified ID is not changed.
• On the "Operator ID Change" screen, if no switch is
operated for more than 30 seconds, the screen auto-
matically changes to the "Monitor Setting" menu
screen.
In this case, the identified ID is not changed.
MESSAGE DISPLAY
On machines equipped with KOMTRAX, you can see the mes-
sages from your Komatsu distributor on this menu (e). When
there is any message, the message display of the standard
screen lights up.
Message is distinguished as follows according to the lighting
states of message display (1).
Lights up in green (A): There is unread message.
Lights up in blue (B): There is any read message to which no
reply is made.
OFF: No messages
REMARK
• When the message display lights up in blue (B), it means
that no reply has been made yet to any read message to
your Komatsu distributor. Reply to the message in accord-
ance with the replying method mentioned below:
• If the starting switch is turned to OFF position when there
is any unread message, the message will be displayed on
the end screen. When the monitor is started next time, the
message will change to a read message (the message dis-
play: lights up in blue (B)).
• The message will be deleted when it becomes out of date
or when a new message reaches.
3-94
WENAM00130
OPERATION
RKA61500