Table of Contents
Advertisement
DOK-INDRV*-MLD3-**VRS*-AP02-EN-P
Rexroth IndraDrive Rexroth IndraMotion MLD (2G) as of MPx-18
Writing drive parameters
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
1. To write drive parameters with the "IndraControl VCP" operator terminal,
create a new screen according to the example described in "Reading
drive parameters" (screen name: "Writing drive parameters").
2. Make the following settings for the representation type:
Fig. 6-30:
Editing the representation type "Floating point number" to write
drive parameters
After the screen has been created and transferred to the operator terminal,
the data of drive parameters can be entered on the display of the operator
terminal and transmitted to the drive.
1.
Click the data release button on the operator terminal:
The first/upper value is marked with black and the cursor flashes under
the last decimal place.
2. Modify the number above the cursor with +/- keys or change the input
digit with "left" key.
Bosch Rexroth AG
Visualization and engineering interfaces
157/267
.
Advertisement
Table of Contents
