Table of Contents
Advertisement
DOK-INDRV*-MLD3-**VRS*-AP02-EN-P
Rexroth IndraDrive Rexroth IndraMotion MLD (2G) as of MPx-18
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Changing the Device Version
1.
In the Project Explorer, call the context menu at the MLD branch and se‐
lect Change IndraLogic Device Version.
The "Change IndraLogic Device Version" dialog is called.
2.
Select the new device version via the drop down list of "New device ver‐
sion".
Fig. 9-7:
Selecting the Device Version
3.
Click the Change Device Version button.
4.
After the device version has been changed, the project should be
cleaned:
In the main menu, execute Build ▶ Clean all.
5.
The cleaned project must be rebuilt:
In the main menu, execute Build ▶ Rebuild all.
The cleaned and rebuilt project will be loaded to the control unit
with the next "Login".
An IndraWorks installation normally contains all the device versions required
for the configuration of IndraMotion MLD; i.e. the device version is contained
in the "New device version" drop down list of the "Change IndraLogic Device
Version" dialog.
If a device is not available, it can be subsequently installed via the installation
of an IW package. The current IW package is made available via the installa‐
tion of a new IndraWorks version. In special cases (bug fixing in a version),
the IW package can be procured from the service department.
Subsequently Installing a Device Version
A new device version can be added by installing a so-called IW package.
1.
In the Project Explorer, call the context menu at the MLD branch and se‐
lect Change IndraLogic Device Version.
The "Change IndraLogic Device Version" dialog is called.
2.
Click the "Install IW Package" link:
Bosch Rexroth AG
249/267
Diagnostic and service functions
Advertisement
Table of Contents
