Diagnostic And Service Functions; Overview And Introduction; Device Editor; Device Editor, General Information - Bosch Rexroth IndraMotion MLD Series Applications Manual

DOK-INDRV*-MLD3-**VRS*-AP02-EN-P
Rexroth IndraDrive Rexroth IndraMotion MLD (2G) as of MPx-18
9

Diagnostic and service functions

9.1

Overview and introduction

9.2

Device Editor

9.2.1

Device Editor, General Information

9.2.2

Status

9.2.3

Files

LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
This section describes the diagnostic and service functions which can be
mainly used for troubleshooting. The possibilities both with free PLC pro‐
gramming and with the use of self-contained technology functions will be ex‐
plained.
Generally, the following classification is made:
● Standard drive diagnostic functions
● MLD diagnostic and service functions
● General service functions
Among other things, the device editor provides tab pages for the configura‐
tion of a device.
The "device editor" can be opened in the Project Explorer via the context
menu entry Open of a control unit [e.g. drive controller with integrated PLC
(IndraMotion MLD)]. When IndraMotion MLD is used, the following tab pages
are contained:
● Files
● Log
● PLC settings
● PLC shell
● Information
The "Log" and "PLC shell" tab pages can be switched on and off:
Tools ▶ Options ▶ IndraLogic 2G ▶ General Settings.
The "Status" tab page shows status information of the respective device and
of the internal bus system.
Fig. 9-1: Device Editor: Status
The "Files" tab page is used to exchange files between the PC (host) and the
external memory card of the drive (IndraLogic runtime system).
Bosch Rexroth AG 237/267
Diagnostic and service functions