Bosch Rexroth IndraMotion MLD Series Applications Manual page 160

158/267 Bosch Rexroth AG
Visualization and engineering interfaces
Notes on utilization for IndraControl VE*
3.
Exit edit mode by pressing the "Enter" key (
The modified parameter value is transmitted to the drive and the system
jumps to the next input parameter on the user interface of the operator
terminal.
Fig. 6-31:
Connecting IndraControl VE* via Ethernet
To establish the connection between a drive and IndraControl VE*, the fol‐
lowing steps are required:
1. Set the IP address of the drive controller (see
2. Add an IndraControl VE* to the project.
3. Call the context menu (as shown in the screenshot) and select Add driv‐
er
Fig. 6-32:
The "Communication driver" dialog opens.
4. Select "BR_WS" to use Com-Server services.
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
DOK-INDRV*-MLD3-**VRS*-AP02-EN-P
Rexroth IndraDrive Rexroth IndraMotion MLD (2G) as of MPx-18
Writing drive parameters with the operator terminal "IndraControl
VCP"
Adding a communication driver
).
"Setting the IP address ").