148/267
Bosch Rexroth AG
Visualization and engineering interfaces
Functions of "Setup-Main"
Navigating and operating
Figure name DC000048
Fig. 6-13:
Overview – configuring IndraControl VCP
"Setup-Main" (Launch) is used to administrate and configure the IndraControl
VCP xx.2 devices. The following functions are available:
●
Setting of IP address, subnet mask, gateway address, device names
●
Execution of firmware updates (Bootloader, Image)
●
Display of device information, such as MAC address, serial number and
image version
●
Storage of the settings made to the Registry
●
Touch calibration for devices with touch-screen operation
●
Setting of the contrast
When operator terminals with keypads are used, the "arrow" keys allow navi‐
gating within "Setup-Main". The desired menu item can be selected with the
"Enter" key. Numeric and alphanumeric characters have to be entered via the
front keyboard. With VCP 02.2, the "plus" and "minus" keys have to be used
to scroll.
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
DOK-INDRV*-MLD3-**VRS*-AP02-EN-P
Rexroth IndraDrive Rexroth IndraMotion MLD (2G) as of MPx-18