Bearing Carrier Assembly - Mercury 15 EFI FourStroke Service Manual

Gear Housing (2.15:1)
3. Use the pinion bearing tool to install the bearing and forward gear assembly into the gearcase.
a
b
Torch Lamp
Pinion Bearing Installation Tool Assembly

Bearing Carrier Assembly

1. Apply 2‑4‑C with PTFE to the bearing carrier seal lips.
Tube Ref No.
2-4-C with PTFE
95
2. Install the seal with the seal face up.
3. Using a suitable mandrel from the bearing mandrel kit, press the seal into the bearing carrier until seated.
Bearing Mandrel Kit
Page 6A-28
Description
b
© 2018 Mercury Marine
a - Pinion bearing tool
b - Bearing and forward gear assembly
c - Torch lamp
c
65074
91‑ 63209
8M0038865
Where Used
Bearing carrier seal lips
a - Mandrel
b - Seal (install face up)
a
6763
91‑ 83166M
90-8M0125265 eng NOVEMBER 2017
Part No.
92-802859A 1