Fastening The Outboard To The Transom - Mercury 200 Pro XS Operation, Maintenance And Installation Manual

OUTBOARD INSTALLATION
Transom Drilling Fixture
2. Drill four 13.5 mm (17/32 in.) mounting holes.

Fastening the Outboard to the Transom

MOUNTING BOLTS
Outboard Transom Mounting Hardware ‑ Supplied with Outboard
Part Number
8M0071543 Outboard mounting bolt ½‑20 x 5.00 in. long (3.25 in. thread)
826711‑17
28421
54012
Part Number
67755005
67755006
814259
67755‑1
8M0071543
8M0038370
67755‑2
8M0028080
eng
5489
Part Name
Nylon insert locknut
Flat washer
Flat washer
Available Outboard Mounting Bolts
Aids in engine installation by acting as a
template for engine mounting holes.
3973
½‑20
1.50 in. diameter
0.875 in. diameter
Description
½‑20 x 2.50 in. long (1.25 in. thread)
½‑20 x 3.50 in. long (1.25 in. thread)
½‑20 x 4.00 in. long (2.25 in. thread)
½‑20 x 4.50 in. long (2.25 in. thread)
½‑20 x 5.00 in. long (3.25 in. thread)
½‑20 x 5.50 in. long (3.25 in. thread)
½‑20 x 6.50 in. long (2.75 in. thread)
½‑20 x 7.50 in. long (2.75 in. thread)
93
91‑98234A2
Description