OUTBOARD MOTOR INSTALLATION
Securing Outboard To Boat Transom
1. Refer to "Determining Recommended Outboard Motor Mounting Height", preceding
and install outboard to the nearest recommended mounting height.
2. Fasten outboard with provided mounting hardware shown.
a -
b -
c -
Steering Cable
STARBOARD SIDE ROUTED CABLE
1. Lubricate O-ring seal and entire cable end.
2-4-C with Teflon
95
Page 1D-4
b
c
1/2 in. Diameter Bolts
(4)
Flat Washers(4)
Locknuts (4)
95
d
a
e
d -
Flat Washers(4)
e -
Marine Sealer - Apply to
Shanks of Bolts, Not
Threads
90-883728 JULY 2001