Antifouling Paint; Lubrication; Throttle Cable; Shift Cable - Mercury 4.2 Diesel Operation & Maintenance Manual

Without sufficient cooling water, the engine, the water pump, and other components will overheat and suffer damage. Provide
a sufficient supply of water to the water inlets during operation.
5. Ensure that the seawater pickup pump is supplied cooling water.
6. Start the engine and check for leaks

Antifouling Paint

IMPORTANT: Corrosion damage that results from the improper application of anti‑fouling paint is not covered by the limited
warranty.
In some areas it may be advisable to paint the bottom of the boat to help prevent marine growth. Contact a Mercury Diesel
authorized repair facility for recommendations for your boat.

Lubrication

Throttle Cable

1. Lubricate the pivot points and guide contact surfaces.
Tube Ref No.
SAE Engine Oil 30W
80

Shift Cable

Lubricate the pivot points and guide contact surfaces.
a
Tube Ref No.
SAE Engine Oil 30W
80
90-8M0113988 DECEMBER 2015
eng
a a
b
Description
b
13347
Description
NOTICE
a -
b -
23643
Where Used
Throttle cable pivot points and guide contact surfaces
Typical inboard model shift cable and transmission linkage
a - Pivot points
b - Guide contact surface
Where Used
Shift cable pivot points and guide contact surfaces
Section 4 - Maintenance
Pivot points
Guide contact surfaces
Obtain Locally
Obtain Locally
Part No.
Part No.
Page 63