Lubrication Points - Mercury 150 EFI Service Manual

MAINTENANCE

Lubrication Points

Lubricate Point 1 with Quicksilver Special Lubricant 101.
1. Trim Rod Ball Ends – Turn the ball ends to work the lubricant into the ball sockets.
Lubricate Point 2 with Quicksilver Anti-Corrosion Grease or 2-4-C Marine Lubricant with Teflon.
2. Propeller Shaft – Refer to Propeller Replacement for removal and installation of the
propeller. Coat the entire propeller shaft with lubricant to prevent the propeller hub
from corroding and seizing to the shaft.
Lubricate Points 3 thru 6 with Quicksilver 2-4-C Marine Lubricant with Teflon or Special
Lubricate 101.
3. Swivel Bracket – Lubricate through fitting.
4. Tilt Support Lever – Lubricate through fitting.
5. Tilt Tube – Lubricate through fitting.
Page 1B-8
1
2
5
1
3
4
57834
90-883728 JULY 2001