Defining Qos For Data - Airspan ASWipLL Commissioning Manual

C o m m i s s i o n i n g M a n u a l D e f i n i n g Q u a l i t y o f S e r vi c e

24.2. Defining QoS for Data

This section describes the procedure for defining QoS for TFTP applications. This
application is based on the UDP transport protocol and uses port 69. Assigning a
higher QoS priority to TFTP packets over standard data packets is important for
remote download of software files by TFTP to ASWipLL devices. This provides
TFTP packets a reliable and unobstructed flow to ASWipLL devices.
For TFTP QoS, you only need to configure the QoS at the BSR, i.e. QoS for TFTP
traffic toward the SPR. For most applications, such as FTP, you need to configure
the identical QoS settings for both the BSR and SPR (i.e. downlink and uplink
traffic).
To define QoS for TFTP applications (at BSR):
1. In the BSR Zoom window, from the Configuration menu, choose QoS, as
shown below.
Figure 24-2: Choosing the QoS command from the Configuration menu
01040311-07 Airspan Networks Inc. 24-5