Airspan ASWipLL Commissioning Manual page 237

C o m m i s s i o n i n g M a n u a l
4. In the First SPR IP Address field, enter the IP address of the first SPR, e.g.
30.0.0.1.
5. From the Status drop-down list, select Enabled.
6. In the Auto Disconnect drop-down list, select Off.
7. In the Subnet Mask field, enter Subnet Mask address (e.g. 255.255.255.248).
The subnets should be defined by mask. A calculator is provided to determine
optimal efficiency.
8. If required, select the Add to Static Route Table check box.
Note: For transparent bridging, clear the Add to Static Route Table check
box.
01040311-07
E s t a b l i s h i n g B S R - S P R L i n k w i t h Au t o C o n n e c t
Figure 8-25: Subnet Address Calculator
Airspan Networks Inc. 8-31