Task 3: Test The Ppr-Spr Link - Airspan ASWipLL Commissioning Manual

C o m m i s s i o n i n g M a n u a l

9.5. Task 3: Test the PPR-SPR Link

You can test the link between the PPR and SPR by pinging the SPR from a PC
located behind the PPR.
To test the link by pinging:
From the PC/Laptop (IP address 10.0.0.2) behind the PPR, open an MS-DOS
prompt and use the
10.0.0.20), as shown below:
Figure 9-14: Pinging the ASWipLL device using the MS-DOS ping-t command
01040311-07
C o n f i g u r i n g a P o i n t - t o - P o i n t R a d i o L i n k
command to ping the SPR (IP address
ping – t
Airspan Networks Inc. 9-15