Task 7: Test The Bsr-Spr Network Link - Airspan ASWipLL Commissioning Manual

C o m m i s s i o n i n g M a n u a l

6.9. Task 7: Test the BSR-SPR Network Link

You can test the link between the BSR and SPR by pinging the SPR from a PC
connected behind the BSR device.
To test the link by pinging:
From the PC/Laptop (IP address 10.0.0.2) behind the BSR, open an MS-DOS
prompt and use the
10.0.0.11), as shown below:
Figure 6-19: Pinging the ASWipLL device using the MS-DOS ping-t command
01040311-07
C h a n g i n g L i n k f r o m R o u t e r t o B r i d g e
command to ping the SPR (IP address
ping – t
Airspan Networks Inc. 6-21