Task 3: Verify Bsr In Ip Filtering Mode - Airspan ASWipLL Commissioning Manual

C o m m i s s i o n i n g M a n u a l

23.5.4. Task 3: Verify BSR in IP Filtering Mode

After you have reset the BSR, it is recommended that you check that the new
settings have taken effect.
To check that the BSR is in IP filtering mode:
In the BSR Zoom window, from the Configuration menu, point to Network, and
then choose PPPoE/IP Filtering.
The PPPoE / IP Filters dialog box appears, as displayed below.
Figure 23-17: Current Device Mode field displaying "IP Filters Active"
01040311-07 Airspan Networks Inc.
D e f i n i n g S e c u r i t y
23-17