Airspan ASWipLL Commissioning Manual page 273

C o m m i s s i o n i n g M a n u a l
To configure a PPR (WipConfig):
1. Connect the PC running WipConfig to the PPR.
2. Start WipConfig.
3. In the Communication group, select Serial.
4. On the toolbar, click the Connect
WipConfig connects to the PPR (i.e. IP address 10.0.0.10).
Figure 9-4: WipConfig connected to PPR device
01040311-07
C o n f i g u r i n g a P o i n t - t o - P o i n t R a d i o L i n k
button.
Airspan Networks Inc.
PPR
Configuration
button
9-7