C o m m i s s i o n i n g M a n u a l
5. Fill in the following fields:
Destination: enter the SPR's IP address (e.g. 10.0.0.20)
Route Mask: enter the SPR's subnet mask (e.g. 255.255.255.240)
To allow WipManage to help you calculate the Subnet Mask, click the Calc
button. The Calculate Subnet dialog box appears, as shown below.
Once you have calculated the Subnet Mask, click the OK button, and the Static
Route Table – Add dialog box reappears.
01040311-07
Figure 7-19: Calculate Subnet dialog box
Airspan Networks Inc.
C h a n g i n g L i n k f r o m B r i d g e t o R o u t e r
7-19
Need help?
Do you have a question about the ASWipLL and is the answer not in the manual?