Summary Of Tasks; Task 1:Configure The Ppr - Airspan ASWipLL Commissioning Manual

C o n f i g u r i n g a P o i n t - t o - P o i n t R a d i o L i n k C o m m i s s i o n i n g M a n u a l

9.2. Summary of Tasks

The flowchart in Figure 4-1 displays a summary of tasks for configuring a point-to-
point wireless link between a PPR and an SPR.
Figure 9-3: Flowchart for configuring PPR in ASWipLL

9.3. Task 1:Configure the PPR

You need to use WipConfig to configure the PPR. This includes defining an SPR
(by IP address) with which the PPR will form a point-to-point radio link. It is
recommended to configure the PPR through a serial connection.
9-6 Airspan Networks Inc. 01040311-07