Airspan ASWipLL Commissioning Manual page 491

C o m m i s s i o n i n g M a n u a l
ASWipLL allows you to apply QoS to the following traffic parameters:
Network type:
IP: all IP packets
PPPoE Discovery: broadcast packets concerned with PPPoE
PPPoE Session: PPPoE data packets
Others: all packets except the above
Transport protocols:
TCP
UDP
ICMP
Applications: based on transport protocol (e.g. TCP) and port number. For
example, FTP (Transport = TCP; port = 21).
IP addresses: packets originating from or destined to specific IP addresses.
802.1p and DiffServ/TOS bits: ASWipLL allows you to cross-map (i.e.
customize) packets with 802.1p and DiffServ/TOS prioritization levels and
assign them to ASWipLL's internal QoS priority levels. For example, you can
define that for DiffServ/TOS priority level 1, ASWipLL will assign its own
priority level of 2.
01040311-07 Airspan Networks Inc.
D e f i n i n g Q u a l i t y o f S e r vi c e
24-3