Airspan ASWipLL Commissioning Manual page 265

C o m m i s s i o n i n g M a n u a l
The description of the AutoConnect trap messages are described in Table 8-2
Table 8-2: Description of AutoConnect trap messages
Trap Message
AutoConnect: On: <SPR index
number>
AutoConnect: Off: <SPR index
number>
AutoConnect to <BSR IP address>-
<SPR index icon>, <SPR's
Ethernet MAC address>-<connected
to BSR at certain decibels
(dBm)>. Ver: <SPR device's
software version>
<SPR's Ethernet MAC Address> was
AutoConnected more than once
<SPR's Ethernet MAC address>
after redirect
<SPR's Ethernet MAC address> is
not set for redirection
01040311-07
E s t a b l i s h i n g B S R - S P R L i n k w i t h Au t o C o n n e c t
The SPR index number is in AutoConnect
mode (after an SPR device disconnected from it
and AutoDisconnect interval has ended),
available for accepting an SPR device
connecting to BSR using the AutoConnect
feature.
The SPR index (for AutoConnect) has an SPR
device connected to it using AutoConnect and
is therefore, not in available for receiving
another SPR through AutoConnect.
SPR device was connected to the BSR using
AutoConnect feature.
The SPR was automatically connected to the
BSR using AutoConnect more than once. This
indicates that the SPR Ethernet MAC address
already exists in WipManage's database, and
thus, the SPR was not successfully redirected.
The SPR was redirected.
The SPR is configured for redirection, but
WipManage cannot locate the SPR's Ethernet
MAC address in the database.
Airspan Networks Inc.
Meaning
8-59