Table of Contents
Advertisement
Section 4
ADDITIONAL INSTALLATION NOTES
All Siemens Flow Tubes are supplied with integral line connections. The end-user must supply any
adapters, etc. required for line connection.
When connecting a screwed fitting to a Kynar, Teflon (PFA) or CPVC Flow Tube, please start the
thread carefully to avoid cross threading. Hand-tighten only. If necessary, use Teflon tape manufac-
tured for plastic piping to effect a leak-proof seal (see Appendix A - Engineering Drawings for de-
tails).
Whenever possible, use the mounting brackets to support the weight of the flow tube.
Consult the supplied engineering drawing for important dimensional data.
1011FT Series 316 Stainless Steel Flow Tube
INLET
(Use Swagelok
Tube Fitting)
Mounting
Bracket
Flow Direction
Indicator
4-11
1020NFM-1D
OUTLET
(Use Swagelok
Tube Fitting)
Advertisement
Table of Contents
