Table of Contents
Advertisement
Section 2
To change the Transducer Model, press the <Right Arrow> to access the [Transducer Model] op-
tion list and move the cursor down to [1021 Xdcr]. Press the [ENTER] key to select menu cell [1021
Xdcr].
Note that the meter now presents you with a recommended transducer(s) in the top-line prompt.
You can now select the transducer you intend to use for this application.
Siemens
2 Channel
Scroll List and select desired Model
Transducer Model
Transducer Size
Xdcr Mount Mode
Spacing Offset
Number Index
Spacing Method
Ltn Value
Install Complete?
Empty Pipe Set
Zero Flow Adjust
Pick/Install Xdcr
Siemens
2 Channel
Scroll List and select desired Model
Transducer Model
Transducer Size
Xdcr Mount Mode
Spacing Offset
Number Index
Spacing Method
Ltn Value
Install Complete?
Empty Pipe Set
Zero Flow Adjust
Pick/Install Xdcr
Siemens
2 Channel
Recommended Xdcr Mount Mode [Reflect]
Transducer Model
Transducer Size
Xdcr Mount Mode
Spacing Offset
Number Index
Spacing Method
Ltn Value
Install Complete?
Empty Pipe Set
Zero Flow Adjust
Pick/Install Xdcr
2-29
[1]
SITE1
1011 Universal
Select Xdcr
Invalid
Invalid
Flow
Invalid
Invalid
Invalid
No
Chan Not Setup
Chan Not Setup
[1]
SITE1
1011 Universal
>1021 Xdcr
1022A
Invalid
Flow
Invalid
Invalid
Invalid
No
Chan Not Setup
Chan Not Setup
[1]
SITE1
1021 Xdcr
C1
Reflect
Invalidlow
4
Invalid
6.359
No
Chan Not Setup
Chan Not Setup
1020NFM-1D
Advertisement
Table of Contents
