How To Identify 1011 Transducers And Mounting Hardware; Reflect Mode - Mounting Frames And Spacer Bar - Siemens SITRANS FUS1020 Manual

Section 3
3.6 1011 UNIVERSAL TRANSDUCER INSTALLATION

3.6.1 HOW TO IDENTIFY 1011 TRANSDUCERS AND MOUNTING HARDWARE

NOTE: When installing transducers, do not key in the V/M (Version/Modification) label number
as the Transducer Size.
1011 series of universal transducers and mounting frames have the following color-codes for easy
identification:
GOLD .................. SIZE 'A'
BLUE ................... SIZE 'B
RED .................... SIZE 'C'
The transducer part number located on the front face provides a more detailed identification. For ex-
ample, the Part Number: 1011PPS-C2 means:
MODEL
NOTE: Refer to paragraph 3.3 Preparing To Mount The Transducers before proceeding with
the following installation procedures.

3.6.2 REFLECT MODE - MOUNTING FRAMES AND SPACER BAR

The combination of a spacer bar with mounting frames is the easiest way to mount in Reflect Mode.
The result is a rigid structure that eliminates spacing measurements, and maintains the transducer-to-
transducer geometry. In addition, reflect mounting allows you to move the entire assembly while main-
taining the original transducer spacing.
Mounting Strap
positioned around
Mounting Strap
Mounting Frame
positioned around
Mounting Frame
Optional on larger pipes,
you can link straps together
to surround pipe
Optional on larger pipes,
you can link straps together
to surround pipe.
INSTALLATION - REFLECT MOUNT WITH FRAMES AND SPACER BAR
1 0 1 1 P P
PORTABLE
PLASTIC
NOTE: Minimum Ltn 0.75 in. (18 mm)
GREEN .................. SIZE 'D'
BLACK ................... SIZE 'E'
S . C 2
SIZE
STD. TEMP.
Space Bar Platform &
Spacer Bar Platform &
Clamping Screw Clamping Screw
Spacer Bar
(Front view)
Mounting Strap
Mounting Strap
Adjusting screw Adjusting Screw
3-27
1020NFM-1D
Space Bar
(Front View)