Table of Contents
Advertisement
1020NFM-1D
Section 6
Although the list of available data items varies depending upon the model, the available data usually
includes those items seen in the [Flow Data] submenu of the [Diagnostics Data] menu.
Selecting Display Data Items
The arrow keys are used to select the item that is displayed on each line as follows:
Right Arrow – Upon pressing the <Right Arrow> key, a selection cursor will appear under one of the
channel indicator numerals (i.e., 1, 2, or 3). Pressing the <Right Arrow> key once again will cause the
selection cursor to move to the other display line and so forth. (Note: The selection cursor will extin-
guish by itself after a period of inactivity.)
Up/Down Arrows – Once a display line is selected as described above, use the <Up or Down Arrows>
to scroll the selected display line through the available data items. (Note: On two channel units the
channel selection indicator will change when the data items come from the other channel.)
When satisfied with the item currently displayed, stop scrolling and use the <Right Arrow> to move to
the other display line. Once the display is set up in the desired configuration, execute no further com-
mands and the selection cursor will eventually extinguish.
Note that the System Menu can be invoked at any time by pressing the <ENTER>
key.
The Data displays provided via the meter's serial interface mimic the other 1010 Family's more elabo-
rate graphic displays. Display selection is provided via the <Up/Down Arrows> only. The 2 x 16 alpha-
numeric display is not available via the serial port.
6-67
Advertisement
Table of Contents
