Table of Contents
Advertisement
Section 6
6.1
THE CHANNEL SETUP MENU
This menu is available after picking a meter type and a measurement technology. Use this menu to
manage site setups. You can create, recall, delete and save entire site setups. You can apply Site
Security, which permits read-only access to the Installation Menu unless you enter a password. The
Channel Enable switch allows you to disable and enable a measurement channel. Be aware that site
name option lists only show sites that are consistent with the currently selected meter type.
CHANNEL SETUP MENU STRUCTURE
Channel Setup
Use this menu cell to create and
name a site setup. Note that the
cell retains the name of the
most recently created site setup
[XYZ].
Use this menu cell at any time
to manually save the site data.
Note that attempting to leave
the menu after entering/editing
any site data triggers a Save
Site pop-up window
automatically.
6.1.1 HOW TO RECALL A SITE SETUP
The [Recall Site Setup] command allows you to reinstall the system at a former site. For an original
installation, see [Create/Name Site] for instructions on how to create a new Site Setup. This menu cell
provides a list of saved site names. Scrolling to a site name and pressing <ENTER> moves all the
parameters associated with that name into Active Memory.
If there are no site setups present in site storage memory, the menu cell reports [No Sites] in the right-
hand column. Saving a site setup with a site name adds the name to this option list.
Recall Site Setup
Channel Enable
Create/Name Site
Site Security
Delete Site Setup
Save/Rename Site
Siemens
Scroll saved Site Setup list and Enter
Recall Site Setup
Channel Enable
Create/Name Site
Site Security
Delete Site Setup
Save/Rename Site
Channel Setup
Use this menu cell to free up site storage
memory by deleting obsolete site setups.
Note that the cell retains the name of the
most recently created site setup [XYZ].
This option list expands as you save more
sites.
*Site Name
Yes
No
*Site Name Entry/Edit
Off
On
Site Name List
Site Name Entry/Edit
2 Channel [1]
XYZ
Yes
1
Off
1
1
6-2
1020NFM-1D
This shows that
the Meter Type is
Dual Channel,
operating with
Channel 1 active.
This shows that
the site setup
[XYZ] is the active
site.
XYZ
This cell shows that
site setup [XYZ] is
Flow
stored in memory,
and can be recalled.
This option list
expands as you save
more sites.
Use this menu cell to
enable or disable Site
Security. Provide a
password to enable.
Re-enter the
password to disable.
Advertisement
Table of Contents
