How To Use The Keypad To Enter Data; How To Select Items From An Option List - Siemens SITRANS FUS1020 Manual

Nema-4/ip 65 clamp-on transit-time flowmeter
Table of Contents

Advertisement

Section 2

2.6.3 HOW TO USE THE KEYPAD TO ENTER DATA

As shown previously, you use the four direction arrows to navigate through the Installation Menu
structure. The Installation Menu chart can be used as a "menu map" to show you exactly where you are
within the menu structure. When you arrive at a menu cell that requires data, you will have to perform
one of three data entry actions:
Select an item (or items) from a scrollable list of options (e.g., a class of liquids).
Provide a numeric value (e.g., a pipe outer diameter).
Provide an alphanumeric string (e.g., a file name for a site setup).
This section explains how to use the KeyPad to enter each type of data. The conventions used with
these instructions are:
Menus, Sub-menus and menu cell names will be enclosed in square brackets: e.g., [Pipe Data],
[Channel Enable].
The following symbols will be used to represent the direction arrows and the ENTER button:
Right Arrow
Left Arrow
Down Arrow
Up Arrow
Enter

How to Select Items from an Option List

This section shows how to select an item from an option list. The following example explains how to
change the current liquid type to [Diesel Fuel]. The left-hand figure below shows the [Select Liquid]
menu cell. Notice that the second line shows the current selection: [Water 20C/68F]. (The "greater
than"symbol placed before the parameter indicates that it is the current selection.)
NOTE: Use the menu chart to see how to get to the [Select Liquid] menu cell.
Press the
symbol. Note that the (>) symbol changes to a colon (:) as shown in the figure below.
You have now entered the [Select Liquid] option list. You can use either the <Up or Down> Arrow to
scroll through the available choices. All option lists operate in a "wrap-around" fashion. This means
that when you arrive at the last item on the list, the next scroll places you back at the top.
"Greater Than" sign
symbol indicates
current parameter is
[Water 20C/68F]
The "colon" indi-
cates that you have
entered the [Select
Liquid] option list.
Select Liquid
: Water 20C/68F
2-11
1020NFM-1D
W ide B eam
Wide Beam
C lamp-O n
Clamp-On
U ltrasonic
Ultrasonic
Flowmeter
Flow meter

Advertisement

Table of Contents
loading

Table of Contents