Table of Contents
Advertisement
Section 2
Press the
symbol. Note that the selection changes to [Water 50C/86F]. This is the next item on
the [Select Liquid] option list. Keeping the key pressed activates an auto-repeat function to scroll
the list automatically. Note that every key pressed item changes to another liquid on list (see para-
graph 6.3 for the [Select Liquid] option list). Note that holding down on either the <Up or Down
Arrow> will cause the menu to scroll up or down (Auto Repeat Feature).
Stop pressing when the screen shows [Diesel Fuel]. Press the Enter
parameter [Water 20C/68F] with [Diesel Fuel]. Note that the screen changes to the menu cell
[Estimated Vs ] and that the second line shows the value: [1377]. This is the estimated sonic
velocity (Vs) of the liquid, Diesel Fuel. If you want to you can use
to verify that the menu cell shows the new liquid selection.
Select Liquid
:Diesel Fuel
A Note on Multiple Select Option Lists
Certain option lists allow you to make more than one selection. For example, the [Datalogger Data]
option list allows you to select any or all of the available data items for your reports. As previously
described, you can use
select an item, the cursor moves to the next item in the option list. If you use
you selected, you will see that an asterisk (
Unlike option lists that offer a single selection, the cursor remains within the option list so that you can
make other selections. To deselect a previously selected item, scroll to that item (marked by an aster-
isk) and then use
.
After selecting all the desired items, use
How To Enter Numeric Data
This section shows how to edit a numeric menu cell. The following example uses the [Pipe OD] menu
cell. The left-hand figure on the next page shows the [Pipe OD] menu cell. Notice that the second line
shows the current outer diameter value: [0.500]. (The "greater than" symbol placed before the param-
eter indicates that it is the current selection.) This example explains how to change the pipe outer
diameter to 4.500.
W ide B eam
Wide Beam
C lamp-O n
Clamp-On
Ultrasonic
U ltrasonic
Flowmeter
Flow meter
Press ENTER Key
to select Diesel
Fuel.
and
to move the cursor through the list. However, when you use
*
) appears next to that item to show that it is selected.
to leave a multiple select option list.
2-12
1020NFM-1D
switch. This replaces the
to return to the [Select Liquid]
Estimated Vs m/s
> 1377
After selecting [Diesel Fuel] the
menu moves to the next cell.
to return to the item that
W ide B eam
Wide Beam
C lamp-O n
Clamp-On
Ultrasonic
U ltrasonic
Flowmeter
F low meter
to
Advertisement
Table of Contents
