When The Recorded Image Is Not Clear; Document Scanner Cleaning Procedure - Toshiba ESTUDIO170F Operation Manual

When the Recorded Image is not Clear...

If the Document Scanner Unit
is dirty, your documents may
not be transmitted clearly. If
the Recording Unit is dirty, the
document you receive may not
be clear. In that case, clean
the Document Scanner Unit or
Recording Unit using the fol-
lowing procedures. You can
check these problems by mak-
ing a copy.
Examples of print problem:
If the problem occurs during
both a transmission and in
copy mode, check the Docu-
ment Scanner Unit.
If the problem occurs during
both receptions and copy
mode, check the Recording
Unit.

Document Scanner Cleaning Procedure

1
Open the Operation
Panel
Open the Operation Panel.
Wipe the Glass
2
Surface and White
Plate
Wipe the Glass surface and
the White Plate with a soft dry
cloth.
• If it is very dirty, wipe it with
a cloth soaked in water and
wrung out, then wipe it with
a dry cloth.
3
Wipe the ADF Pad
and Rollers
Wipe the ADF Pad and Rollers
with a dry cloth.
• If it is very dirty, wipe it with
a cloth soaked in water and
wrung out, then wipe it with
a dry cloth.
CAUTION:
Be careful not to injure your
finger(s) on the ADF spring
when you wipe the ADF
pad.
215