Operation Flow And Basic Operations; Operation Flow - YOKOGAWA DAQSTATION DX100P Operation Manual

Operation Flow and Basic Operations

Operation Flow

14
This section describes the main operations for making measurements of a batch
process and applying electronic signature to the measured data file.
Register administrators.
Administrator sets the DXP.
An administrator logs in.
Set other system mode items.
Log out (Exit the system mode).
Set conditions and make measurements.
Set measurement conditions.
• Set the measurement range.
• Set batch conditions.
• Set messages to be written to the measured data.
• Set other engineering mode items.
• Exit the engineering mode.
Start measurements.
Stop measurements.
Apply electronic signature.
Apply electronic signature using DAQSIGNIN.
Note
When using the DXP, have an external storage medium inserted in the drive. The measured
data is saved to the external storage medium. The setting changes are also saved to the
external storage medium, when exiting the engineering mode or system mode.
Once an administrator is registered,
you are required to log in to operate
the DXP.
Set the date/time.
Register users.
A user logs in.
Log out.
A user logs in.
Write messages.
Log out.
See page 17.
See page 20.
See page 22.
See page 22.
See page 25.
See page 26.
See page 27.
See page 27.
See page 28.
See page 29.
See page 29.
See page 30.
See page 31.
See page 33.
See page 33.
See page 33.
See page 35.
See page 36.
See page 37.
See page 38.
IM 04L05A01-02E