Processor - Huawei FusionServer Pro 2288X V5 User Manual

FusionServer Pro 2288X V5 Server
User Guide
Port
Serial port
PSU socket

2.3 Processor

●
●
●
●
Issue 04 (2020-06-05)
Type
RJ45
-
The server supports one or two processors.
If only one processor is required, install it in socket CPU1.
The same model of processors must be used in a server.
Contact your local Huawei sales representative or use the
Computing Compatibility Checker
Copyright © Huawei Technologies Co., Ltd.
Quantity Description
1 Default operating system
serial port used for debugging.
You can also set it as the iBMC
serial port by using the iBMC
command.
NOTE
The port uses 3-wire serial
communication interface, and the
default baud rate is 115,200 bit/s.
2 Used to connect to the power
distribution unit (PDU) in the
cabinet. You can select the
number of power supply units
(PSUs) as required.
NOTE
● When determining the
● If only one PSU is used,
to determine the components to be used.
2 Hardware Description
quantity of PSUs, ensure that
the rated power of the PSUs
is greater than that of the
server.
Predicted PSU Status cannot
be set to Active/Standby on
the iBMC WebUI.
Intelligent
16