Configuring Audio Settings; General Audio Settings - Polycom VSX Series Administrator's Manual

Administrator's Guide for the VSX Series

Configuring Audio Settings

General Audio Settings

4 - 6
To configure general audio settings:
1. Go to System > Admin Settings > Audio Settings.
2. Configure these settings:
Setting
Sound Effects
Volume
Incoming Video
Call
User Alert Tones
Mute Auto-Answer
Calls
Enable Internal
Ringer
VSX 3000A
Enable Polycom
Microphones
VSX 3000A
VSX 5000
VSX 6000A
VSX 7000s
VSX 7000e
VSX 8000
3. Select
and enter VCR/DVD settings for the VSX 7000e system:
Setting Description
VCR/DVD In Level Sets the volume at which the VCR/DVD player plays, relative
to other audio from the system.
VCR/DVD Out Sets the volume at which the call is recorded.
Level
Description
Sets the volume level of the ring tone and user alert tones.
Specifies the ring tone used for incoming calls.
Specifies the tone used for user alerts.
Specifies whether to mute incoming calls.
Incoming calls are muted by default until you press the mute
on the microphone or on the remote control.
Specifies an additional ring tone when receiving an
incoming call. The internal ringer is built into the system and
alerts you to incoming calls.
Specifies whether integrated and attached Polycom
microphones are enabled. You can disable this option to
turn off:
• VSX 3000A system's integrated microphone
• VSX 7000e and VSX 8000 microphones
Disable this setting in the following situations:
• You have an external handset, headset, or lapel
microphone attached to a VSX system line input.
This option is automatically disabled if a line input is set to
Audio Mixer, and echo cancellation is enabled on a line set
for Audio Mixer.