Participant Count Cdr Details; Eagleeye Cube Hdci Camera Software Updates - Polycom RealPresence Group Series Administrator's Manual

Procedure
1. In the local interface of the RealPresence Group Series system, go to Camera .
2. Select Camera Tracking On.
Disable Camera Tracking
You can disable camera tracking in the local interface.
Procedure
1. In the local interface of the RealPresence Group Series system, go to Camera.
2. Select Camera Tracking Off.

Participant Count CDR Details

When used with a RealPresence Group Series system and an EagleEye Cube HDCI camera, the camera
system tracks the number of conference participants in a room. Call information is collected in a Polycom
RealPresence Resource Manager Call Detail Report (CDR) and provides detailed data to system
administrators.
Note: To get the most accurate result of participant count data, the number of participants in a single
room should be 10 people or less.
Participant Count
Participant
People Minutes
People Count (call begin)
People Count (peak value)
People Count (call end)

EagleEye Cube HDCI Camera Software Updates

Updates to the EagleEye Cube HDCI software are included with the RealPresence Group Series system
software updates. No license number or key is needed to update the camera software. Software for an
Polycom, Inc.
Configuring a Camera or Camera Control System
Description
The total people count for each minute of the call. For
example, If there are five people in a sixty minute
meeting and five additional people join at 10 minutes
after the start of the meeting, the total People Minutes
will be 550. (5*60)+ (5*50).
Number of people on the call during the first minute of
the call, tracked with EagleEye Cube HDCI camera
system.
Peak number of people participating in the call, tracked
with the EagleEye Cube HDCI camera system.
Number of people participating on the call during the
last minute of the call, tracked with the EagleEye Cube
HDCI camera system.
167