Configure The Acoustic Fence; Usb And Bluetooth Headset Support - Polycom RealPresence Group Series Administrator's Manual

Related Links
Configure Audio Input Settings
Configure Audio Output Settings
Configure General Audio Settings

Configure the Acoustic Fence

You can configure your system to use Polycom Acoustic Fence technology.
Procedure
1. In the system web interface, go to Admin Settings > Audio/Video/Content > Audio.
2. In the system web interface, go to Audio/Video > Audio > General Audio Settings.
3. Select the Enable Acoustic Fence check box.
4. Set Acoustic Fence Sensitivity from 0 to 10, where 0 is the minimum microphone sensitivity and
10 is the maximum.
Higher values increase the radius of the fence area around the primary microphone.

USB and Bluetooth Headset Support

USB headsets and Bluetooth headsets with USB adapters are supported as audio input/output devices
with RealPresence Group Series systems. The headset functions automatically without any required
configuration or intervention. After verifying the headset hardware and software is supported, plug the
headset in to a USB port on the system, or enable pairing mode and plug in the USB adapter.
The USB 2.0 ports support USB headsets. RealPresence Group 700 system has USB 2.0 port on the
front panel and also includes a USB 3.0 port on rear panel, which does not support USB headsets.
You can hear and control audio on your device while your headset is connected to the system. The USB
headset audio controls do not change the system audio functions such as mute or volume control.
Only a single headset can connect to the system at one time. Once connected, the headset is used as
the primary audio input and output device for the system. So when a USB headset is plugged in,
microphones, 3.5 mm audio input (in Playback Option echo cancelled mode), and speakers are all turned
off; audio is heard only through the USB headset. This is similar to a headset plugged in or paired with a
cell phone.
Headsets with these sampling rates are supported: 8 kHz, 16 kHz, 24 kHz, 32 kHz or 48 kHz.
For a list of supported headsets, refer to the Polycom RealPresence Group Series Release Notes at
Polycom Support.
Polycom, Inc.
on page 141
on page 145
on page 140
Configuring Audio Settings
148