Configure Admin Id And Password; Powering On The Polycom Touch Control; Power Off The Polycom Touch Control - Polycom RealPresence Group Series Administrator's Manual

Related Links
Configuring the Software
Related Links

Configure Admin ID and Password

Configure Admin ID and Password
You can set an admin ID and password, which allows you to limit access to the Polycom Touch Control
Administration settings.
Procedure
1. From the Home screen touch
An admin ID and password might be configured for the Touch Control Administration settings. The
default ID is admin and the default password is 456.
2. Touch the Security tab.
3. Set the following security settings.
Setting
Admin ID
Admin Password
Related Links
Configuring the Software
Related Links
Configure Location and Time Settings

Powering On the Polycom Touch Control

You can power on the Polycom Touch Control. For details, see the following topic.
Related Links
Set Up the Polycom Touch Control

Power Off the Polycom Touch Control

You can power off the Polycom Touch Control.
Procedure
1. From the Touch Control Home screen, touch
Polycom, Inc.
on page 239
on page 242
Administration.
on page 239
on page 241
on page 238
Setting Up a Polycom Touch Control Device
Description
Specifies the ID for the administrator account. The
default Admin ID is admin.
Specifies the password for administrator access when
logging in to the Polycom Touch Control. The default
password is 456.
When this password is set, you must enter it to
configure the Polycom Touch Control Admin Settings.
The password must not contain spaces.
User Settings.
242