Configure Ip Address (Ipv6) Settings - Polycom RealPresence Group Series Administrator's Manual

Setting
Default Gateway

Configure IP Address (IPv6) Settings

You can configure IP address (IPv6) settings for RealPresence Group Series systems.
Procedure
1. In the system web interface, go to Admin Settings > Network > LAN Properties.
2. Configure the following IPv6 settings on the LAN Properties screen.
Setting
Enable IPv6
IP Address
Enable SLAAC
Link-Local
Site-Local
Global Address
Polycom, Inc.
Description
Displays the gateway currently assigned to the system.
If the system does not automatically obtain a gateway
IP address, enter one here.
Description
Enables the IPv6 network stack and makes the IPv6
settings available.
Specifies how the system obtains an IP address.
• Obtain IP address automatically—Select if the
system gets an IP address from a SLAAC or a
DHCP server on the LAN.
• Enter IP address manually—Select if the IP
address will not be assigned automatically.
Specifies whether to use stateless address
autoconfiguration (SLAAC) instead of DHCP to
automatically obtain an IP address.
Using DHCP to get the IP address requires a DHCP
server to get the address from the network, but with
SLAAC, existing routers help the system get the IP
address from the network.
Displays the IPv6 address used for local
communication within a subnet.
This setting is configurable only when Enter IP
Address Manually is selected.
Displays the IPv6 address used for communication
within the site or organization.
This setting is configurable only when Enter IP
Address Manually is selected.
Displays the IPv6 internet address.
This setting is configurable only when Enter IP
Address Manually is selected.
Configuring Network Settings
62