Camera Presets - Polycom RealPresence Group Series Administrator's Manual

• In the system web interface, go to Admin Settings > Audio/Video > Video Inputs, and then select
the Input used by the EagleEye Director.
◦ Enable the Use Voices to Track People setting.
• If the RealPresence Group Series system is paired with a Polycom touch device, follow these steps:
1. On the touch device, touch Cameras on the Home screen or the Call screen.
2. If the EagleEye Director is not currently selected, select it.
3. Touch Select Cameras and select the EagleEye Director camera.
4. Touch Control Camera.
5. Select Start Camera Tracking.

Camera Presets

Camera presets are stored camera positions that you can create in the RealPresence Group Series
system local interface before or during a call. Presets allow you to do the following:
• Automatically point a camera at pre-defined locations in a room.
• Select a video source.
If your camera supports pan, tilt, and zoom movement, and it is set to People, you can create up to 10
preset camera positions for it using the remote control or a touch device, such as the RealPresence
Touch. Each preset stores the camera number, its zoom level, and the direction it points (if appropriate).
If a Polycom touch device is paired with a system, you must use the touch device to create presets. For
more information about creating and using presets, refer to the Polycom RealPresence Group Series
User Guide . Once presets are in place, you can view them in the system web interface by going to
Utilities > Tools > Remote Monitoring.
Note that if you use a EagleEye Director with your RealPresence Group Series system, you cannot use
presets for voice tracking.
Related Links
Configure FECC on the Far-end Site Camera
Configure FECC on the Far-end Site Camera
If far-end camera control (FECC) is allowed, you can create 10 presets for a far-site camera. These
presets are saved only for the duration of the call. You might also be able to use presets created at the far
site to control the far-site camera.
Procedure
» In the system web interface, go to Admin Settings > Audio/Video > Video Inputs > General
Camera Settings and select Allow Other Participants in a Call to Control Your Camera.
For details on how to create camera presets, or how to move a camera to a stored preset, refer to the
Polycom RealPresence Group Series User Guide .
Related Links
Camera Presets on page 188
Polycom, Inc.
Configuring a Camera or Camera Control System
on page 188
188