Set Up Multitiered Directory Navigation; Polycom Realpresence Cloud Service - Polycom RealPresence Group Series Administrator's Manual

2. Decide whether to automatically validate web clients by enabling the Always Validate
Peer Certificates from Browsers setting. If you do enable the setting, you'll need to
install a signed server certificate and all of the CA certificates needed to validate
browser certificates for all web clients. Then configure the certificate revocation
method.
3. Decide whether to validate servers by enabling the Always Validate Peer
Certificates from Servers setting. If you do enable the setting, you must install of the
CA certificates needed to validate server certificates from all remote servers. Then
adjust the certificate revocation method accordingly. For example, you might need to
load additional CRLs if you use the CRL revocation method).
• To use the Medium or High Security Profile with provisioning:
◦ The RealPresence Resource Manager system must be using commercial mode.
◦ You must manually assign the Medium or High Security Profile to the system during
installation using the setup wizard, or afterwards using the system web interface.
◦ Configure PKI according to your company's guidelines.
• To use the Low Security Profile with provisioning:
◦ The RealPresence Resource Manager system must be using commercial mode.
◦ You can enable provisioning in the setup wizard. All provisionable settings are taken from the
RealPresence Resource Manager system.

Set Up Multitiered Directory Navigation

You can use the RealPresence Resource Manager to navigate the RealPresence Group Series system
directories or contacts. Contacts are displayed in a hierarchical format, where you can select the top
directory and search for contacts within each level of the directory hierarchy.
This feature is supported using a RealPresence Resource Manager server (LDAP) and does not include
standalone LDAP servers or other global directory servers.
The following limitations apply to this feature:
• You can use RealPresence Resource Manager 7.1 and higher only.
• You can search and navigate up to three directory levels.
• You cannot use the Polycom Touch Control to navigate the system LDAP directories.
• This feature is supported on dynamically-managed video conferencing systems only.
Procedure
1. Go to Admin Settings > Servers > Directory Servers and make selections for each setting.
2. Go to Admin Settings > Servers > Provisioning Service and enable provisioning.
Related Links
Setting Up and Configuring Directory Servers
Related Links
Configure a Provisioning Service

Polycom RealPresence Cloud Service

®
The Polycom Cloud service enables service providers to configure RealPresence Group Series systems
with a provisioning service. During the first-time system setup, the RealPresence Cloud service might be
Polycom, Inc.
on page 138
on page 35
Using a Provisioning Service
37