Set The Language; Set The Date And Time - Polycom RealPresence Group Series Administrator's Manual

Set the Language

You can select from 16 different languages to display in the RealPresence Group Series local and system
web interfaces.
Procedure
» In the system web interface, go to Admin Settings > General Settings > Language and select
the language to use in the interface.

Set the Date and Time

On either the system web interface, you can set the date and time settings for your RealPresence Group
Series system.
Procedure
1. In the system web interface, go to Admin Settings > General Settings > Date and Time >
System Time.
2. Configure these settings:
Setting
Date Format
Time Format
Auto Adjust for Daylight Saving Time
Time Zone
Time Server
Primary Time Server Address
Secondary Time Server Address
Polycom, Inc.
Configuring General System Settings
Description
Specifies how the date is displayed in the interface.
Note: This a web-only setting.
Specifies how the time is displayed in the interface.
Specifies the daylight saving time setting. When you
enable this setting, the system clock automatically
changes for daylight saving time.
Note: This a web-only setting.
Specifies the time difference between GMT (Greenwich
Mean Time) and your location.
Specifies whether the connection to a time server is
automatic or manual for system time settings. You can
also select Off to enter the date and time yourself.
Specifies the address of the primary time server to use
when Time Server is set to Manual.
Specifies the address of the time server to use when
the Primary Time Server Address does not respond.
This is an elective field.
31